Related Item Images
RDX K Switch Green Bunny Burners Off On
Availability: In stock
Off - On
Switch legends that are screen printed On (not stickers)
Plastic housing with numbers, easy to crimp terminals
Switch will normally be in the off position, once pressed the switch will turn on. This switch operates just like a normal house lighting switch.
The white Legend window is illuminated by a Green LED.
This can be wired like other dashboard illumination to illuminate the Legend for easier locating in dark situations.
The 'On' operation can be noted by an Amber LED 'Slit'.
Rated as a 12v DC switch
Switching load is 20amp max at 12volts, we recommend the switch is used to 'switch' on relays or low load devices to prolong the life of the switch,it also good practice to use relays for high load devices.
IP66 rated same as original equipment switches.
Standard male Spade terminals to the rear of the switch.
Switch push fits into hole.
There are Five connections to the rear of the switch
Two earths for each LED
One power for Legend Symbol LED
One Power input for the switch
One Power output also illuminates the Orange 'Slit'
The switch can be fitted without a trim panel to most flat surfaces provided the correct hole is cut and the thickness is less than 5mm.
Optional Single or multiple Mounting panels are available
One Wiring guide is included for one or more switches.
There is a rubber gasket to the rear of the switch, this fits against the cut hole or panel cut out.
Switch requires a hole 21.2 mm width, 37.2mm height
Actual switch area required 28mm width, 52mm height
Overall depth 49.61mm, 37.8mm behind switch including terminals
The switch will not fit any existing factory hole on a Land Rover.
Other parts will be required to fit and operate the switch, these include connectors, wire, device to be switched etc